Willie Walker
Tifton
Summary
Resourceful Electronics Mechanic known for high productivity and efficient task completion. Specialize in circuitry design, troubleshooting complex systems, and precision soldering. Excel in problem-solving, time management, and adaptability, leveraging these soft skills to navigate challenging repairs and maintenance tasks with ease.
Overview
11
11
years of professional experience
Work History
Electronic Mechanic
Marine Depot
Albany
01.2019 - Current
- I, currently work as Electronic Technician for CWC 233 where I Rebuild and Inspect and Repair Only As Necessary (IROAN) electronic military equipment according to Statement of work (SOW) and Technical Manuals (TM).
- My duties include repair, diagnosing, and troubleshooting electronic devices with minimal assistance.
- I use various types of testing equipment such as multimeters, Oscilloscopes, power supply, and spectrum analyzers to assist in determining faults.
- I have years of experience in Optics installation and repair of vehicles such as Assault Amphibious Vehicles (AAV-P7s), High Mobility Mutipurpose, Wheeled Vehicles, (HMMWVs), Medium Tactical Vehicle (MTVRS), Light Armor Vehicles (LAVs), and Mine Resistant Ambush Protection Vehicles (MRAP).
- I'm able to use provided drawings, schematics, Interactive Electronic Technical Manual (IETM), and other technical documentation for repairing equipment.
- While performing my duties I ensure that I'm adhering to all safety and environmental guidelines established by Risk Management Office (RMO) and Job Hazard Analyses (JHAs).
- I assist the Supervisor and Work Leaders to ensure equipment meets quality standards of the SOW, Quality Control Inspector (QCI), and International Organization for Standardization (ISO).
- Also, I work with Supervisors and Work Leaders ensure equipment is repaired within cost and meets the Master Work Schedule (MWS) completion deadline and status on TMDE Website.
- I, Installed include Tactical Operation Center Intercommunications System (TOCNET), Harris AN/PRC-152 Radio System and the Single Channel Ground and Airborne Radio System (SINCGARS).
- I, Demonstrate good work ethics and encourage co-workers to practice safety.
- Responsible for performing with advanced technical knowledge to solve routine problems by interpreting technical manuals or similar documents.
- I, Build, repair, test, and install communications equipment for the LAV-C2 Command and Control vehicle, to include Panasonic Tough book, Military-Rugged Mobile Computers, the VDC-500 IP Data Controller, Routers and Switches for internal and external vehicle networking.
- I, Disassemble and perform routine, standardized testing and installation of Blue Force Tracker (BFT), cabling and equipment to include the Defense Advanced GPS Receiver (DAGR) and MT-2011 transceiver, the CREW Vehicle Receiver Jammer (CVRJ), the Driver's Vision Enhancer (DVE), various configurations of Tactical Operations Center Intercommunications System (TOCNET), Single Channel Ground and Airborne Radio System (SINCGARS), and Combat Net Radio (CNR) systems and subsystems.
- Configure, test and install AN/VRC 103, AN/VRC 104, AN/VRC 110 and AN/VRC113 in military tactical vehicles States Marine Corps Amphibious Assault Vehicle (AAV), Land Assault Veh(LAV), M988 recovery vehicle, Medium Tactical Vehicle Replacement (MTVR), Logistics Vehicle System Replacement (LVSRHigh Mobility Multipurpose Wheeled Vehicle (HMMWV or Humvee) and Mine-Resistant Ambush Protected (MRAP) family of vehicles to include the Buffalo, Cougar and the All-Terrain.
- New L-MATIS SYSTEM 1, SYSTEM 2 .Communication Installation and programming.
- I, Remove and replace defective parts and assemblies.
- I, Analyzing repair practices and developing procedural instructions for use by others on methods and steps to repair equipment.
Electronic Technician 3
PAE, Pacific Architects and Engineer
01.2015 - 01.2016
- Troubleshoot and repair military tactical vehicles to include the complete family of United States Marine Corps Amphibious Assault Vehicle (AAV), Land Assault Vehicle (LAV), M988 recovery vehicle, Medium Tactical Vehicle Replacement (MTVR), Logistics Vehicle System Replacement (LVSR), High Mobility Multipurpose Wheeled Vehicle (HMMWV or Humvee) and Mine-Resistant Ambush Protected (MRAP) family of vehicles to include the Buffalo, Cougar and the All-Terrain Vehicles (M-ATV).
- Remove and replace defective parts and assemblies.
- Install, modify, overhaul, troubleshoot, repair and maintain Sets up and operate a variety of test sets and diagnostic equipment.
- Use soldering techniques and electronic component removal and replacement.
- Inspect, clean and test.
- Assure vehicle readiness and a high quality product, resulting in job completion in a timely manner while meeting all installation guideline and requirements listed in the statement of work (SOW).
- Read diagrams, drawings, specifications, and schematics of complete systems and equipment to understand and change out or replace the system function and interconnections of the various assemblies and troubleshoot the system.
- Analyzing and diagnosing faults in the operational configuration of electronic systems and equipment.
- Interpreting circuit wiring, logic cable diagrams, drawings, specifications, and schematics of complete systems and equipment to understand the function and interconnections of the various assemblies and troubleshoot the system.
Elect. Tech 2 Electronic Technician
URS, Federal Service
09.2014
- Troubleshoot and repair military tactical vehicles to include the complete family of United States Marine Corps Amphibious Assault Vehicle (AAV), Land Assault Vehicle (LAV), M988 recovery vehicle, Medium Tactical Vehicle Replacement (MTVR), Logistics Vehicle System Replacement (LVSR), High Mobility Multipurpose Wheeled Vehicle (HMMWV Humvee) and Mine-Resistant Ambush Protected (MRAP) family of vehicles to include the Buffalo, Cougar and the All-Terrain Vehicles (MATV).
- Remove and replace defective parts and assemblies.
- Install, modify, overhaul, troubleshoot, repair and maintain Sets up and operate a variety of test sets and diagnostic equipment.
- Use soldering techniques and electronic component removal and replacement.
- Inspect, clean and test.
- Assure vehicle readiness and a high quality product, resulting in job completion in a timely manner while meeting all installation guideline and requirements listed in the statement of work (SOW).
- Read diagrams, drawings, specifications, and schematics of complete systems and equipment to understand the function and interconnections of the various assemblies and troubleshoot the system.
- Analyzing and diagnosing faults in the operational configuration of electronic systems and equipment.
- Interpreting circuit wiring, logic cable diagrams, drawings, specifications, and schematics of complete systems and equipment to understand the function and interconnections of the various assemblies and troubleshoot the system.
Education
A+ Certification - Networking Specialist
Diploma - Industrial Maintenance
Diploma - Electrical Maintenance
Certificate - PLC Program Logic Control
Certificate - Mechanical Technician
Certificate - Wiring and Conduit
Other Qualifications - Job Related Training Courses
- 480 hrs. C.I.S Computer Information System Degree Training
- 480 hrs. Industrial Maintenance Degree Training
- 20 hrs. 10/2012 - 2018-IPC Specialist Certification Albany Ga.
- 80 hrs 2014-2015- Safety Training and Consultant URS/AECOM 2 year Albany
- 80 hrs. 2001-2003 - Network specialist 2 years MTC Tifton,Ga.
- 8 hrs 7/2000 - One Minute Manager Certification (ABAC College) ,Burlen Corp.
- 20 hrs. 10/2012 - 2018 Certified IPC Specialist , Albany Ga.
- 7 hrs. 1-2019 - Yellow Belt Certificate, Albany Ga.
- 1 hrs Cyper Security 1hour
- 100 Hr.Days of Summer
- 10 Hr. 2020 OSHA Hour of training
- 3 hrs. Certificate of Identifying And Safeguarding Personally Identifiable Information
Timeline
Electronic Mechanic
Marine Depot
01.2019 - Current
Electronic Technician 3
PAE, Pacific Architects and Engineer
01.2015 - 01.2016
Elect. Tech 2 Electronic Technician
URS, Federal Service
09.2014